2017 Komatsu PC290LC-11 Hoe
$285,000 USD
General Information
A long reach arm and boom combined with a heavy duty undercarriage provide extended reach with a stable and reliable platform. Enhanced controller logic and new Tier 4 Final engine technology improve performance and fuel efficiency.
Hours: 1050
Location: Fort McMurray
Serial: KMTPC255JGWA27618
Detailed Specs
- Power Train
- Hydraulics
- Drives and Brakes
- Swing System
- Undercarriage
- Coolant and Lubricant Capacity (refilling)
- Sound Performance
- Operating Weight (approximate)
| Model | Komatsu SAA6D107E-3* | |
| Type | Water-cooled, 4-cycle, direct injection | |
| Aspiration | Komatsu variable geometry turbocharged, aftercooled, cooled EGR | |
| Number of cylinders | 6 | |
| Bore | 107 mm | 4.21” |
| Stroke | 124 mm | 4.88” |
| Piston displacement | 6.69 ltr | 408 in³ |
| Horsepower: | ||
| SAE J1995 : Gross | 159 kW | 213 HP |
| ISO 9249/SAE J1349 : Net | 147 kW | 196 HP |
| Rated rpm | 2050 rpm | |
| Fan drive type | Mechanical | |
| Governor | All-speed control, electronic. | |
| *EPA Tier 4 Final emissions certified |
HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves
| Number of selectable working modes | 6 | |
| Main pump: | ||
| Type | Variable displacement piston type | |
| Pumps for | Boom, arm, bucket, swing, and travel circuits | |
| Maximum flow | 479 ltr/min | 126.5 U.S. gal/min |
| Supply for control circuit | Self-reducing valve | |
| Hydraulic motors: | ||
| Travel | 2 x axial piston motor with parking brake | |
| Swing | 1 x axial piston motor with swing holding brake | |
| Relief valve setting: | ||
| Implement circuits | 380 kgf/cm²/ 37.3 MPa | 5,400 psi |
| Travel circuit | 380 kgf/cm² / 37.3 MPa | 5,400 psi |
| Swing circuit | 295 kgf/cm²/ 28.9 MPa | 4,190 psi |
| Pilot circuit | 33 kgf/cm² / 3.2 MPa | 470 psi |
| Hydraulic cylinders: | ||
| Number of cylinders | Bore x Stroke x Rod Diameter | Bore x Stroke x Rod Diameter |
| Boom / 2 | 140 mm x 1300 mm x 100 mm | 5.5″ x 51.2″ x 3.9″ |
| Arm / 1 | 150 mm x 1635 mm x 110 mm | 5.9″ x 64.3″ x 4.3″ |
| Bucket / 1 | 140 mm x 1009 mm x 100 mm | 5.5″ x 39.7″ x 3.9″ |
| Steering control | Two levers with pedals | |
| Drive method | Hydrostatic | |
| Maximum drawbar pull | 249 kN / 25400 kg | 56,000 lb |
| Gradeability | 70% | 35° |
| Maximum travel speed: (Auto-Shift) | ||
| High | 5.5 km/h | 3.4 mph |
| Mid | 4.1 km/h | 2.5 mph |
| Low | 3.0 km/h | 1.9 mph |
| Service brake | Hydraulic lock | |
| Parking brake | Mechanical disc brake |
| Drive method | Hydrostatic | |
| Swing reduction | Planetary gear | |
| Swing circle lubrication | Grease-bathed | |
| Service brake | Hydraulic lock | |
| Holding brake/Swing lock | Mechanical disc brake | |
| Swing speed | 10.5 rpm | |
| Swing torque | 8889 kg•m | 64,292 ft lbs |
| Center frame | X-frame |
| Track frame | Box-section |
| Seal of track | Sealed track |
| Track adjuster | Hydraulic |
| Number of shoes | 48 each side |
| Number of carrier rollers | 2 each side |
| Number of track rollers | 8 each side |
| Fuel tank | 400 ltr | 105.7 U.S. gal |
| Coolant | 36 ltr | 9.5 U.S. gal |
| Engine | 23.1 ltr | 6.1 U.S. gal |
| Final drive, each side | 8.5 ltr | 2.2 U.S. gal |
| Swing drive | 7.2 ltr | 1.9 U.S. gal |
| Hydraulic tank | 132 ltr | 34.9 U.S. gal |
| Hydraulic system | 250 ltr | 66.0 U.S. gal |
| DEF tank | 23.0 ltr | 6.07 U.S. gal |
| Exterior – ISO 6395 | 104 dB(A) |
| Operator – ISO 6396 | 70 dB(A) |
Operating weight, including 6150 mm 20’2″ one-piece boom, 3200 mm 10’6″ arm, SAE heaped 1.41 m³ 1.85 yd³ backhoe bucket*, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.
| Shoes | 700 mm | 28″ |
| Operating Weight | 30570 kg | 67,395 lb |
| Ground Pressure | 0.54 kg/cm² | 7.71 psi |
| Shoes | 800 mm | 31.5” |
| Operating Weight: | 30950 kg | 68,233 lb |
| Ground Pressure | 0.48 kg/cm² | 6.83 psi |
| Shoes | 850 mm | 33.5″ |
| Operating Weight: | 31141 kg | 68,654 lb |
| Ground Pressure | 0.45 kg/cm² | 6.47 psi |
| Component Weights | ||
| Arm including bucket cylinder and linkage | ||
| 3200 mm 10’6″ arm assembly | 1432 kg | 3,157 lb |
| 3500 mm 11’6″ arm assembly | 1504 kg | 3,316 lb |
| One piece boom including arm cylinder | ||
| 6150 mm 20’2″ boom asssembly | 2448 kg | 5,397 lb |
| Boom cylinders x 2 | 231 kg | 509 lb |
| Counterweight | 5510 kg | 12,148 lb |
| 1.41 m³ 1.85 yd³ bucket – 48″ width | 1088 kg | 2,399 lb |
Get In Touch
1-780-922-1178
Location
285 MacDonald Crescent
Fort McMurray, AB T9H 4B7